Brake Repairs in Gateshead

Compare, Book, Repair. Save.

Get your brakes sorted FAST with one of our Gateshead Braking specialists.



Brake Pad, Brake Disc and ABS work is essential to your safety, but can be pricey, which is where we come in. Tell us what's required, and friendly, reviewed and rated garages in Gateshead will competitively quote for the work required - so you can be sure of getting great value. We also offer Gateshead Clutch Replacement and Gateshead Servicing.


Enter Your Registration and get your competitive Brake Repair prices now!

Top garages for Brake Repairs in Gateshead (184 found)
Wilsons Auto Service Centre
751 Jobs Completed
Newcastle upon Tyne
4.7 / 5

Why choose Wilson's? One stop car care shop Competitive prices Quality parts only Dealership service without the dealership prices Professional

One Stop Motoring Services
48 Jobs Completed
Newcastle upon Tyne
4.8 / 5

With years of experience in the motoring industry, we provide both mobile and at garage services. We offer quotes on quality products but are also able to quote on other

Duffys Motors
1969 Jobs Completed
Gateshead
4.9 / 5

Gearbox specialist for 3 years before moving onto work at a number of different dealerships including Kia, Skoda, Audi, Fiat and Alfa. In 2013 I decided to fly solo and s

Motor Spot Limted
5 Job Completed
Newcastle upon Tyne
5.0 / 5

Motor Spot is a one stop shop for vehicles in Newcastle upon Tyne. We specialize in vehicle repairs & brand new tyres. Our experienced staff is genuine and reliable g

GC Autos LTD
603 Jobs Completed
Gateshead
4.7 / 5

We are a family run garage located in Gateshead, on Saltmeadows Road. Established in 2009, we have a wealth of knowledge in all makes and models but also specialise in Mi

Martin Brothers Motor Company
607 Jobs Completed
Jarrow
4.4 / 5

We are the largest independent car dealership, vehicle mot and repair centre in our county. We pride our selves on our customer care, service, satisfaction and have been

ID Coachworks Specialists Ltd
431 Jobs Completed
Hebburn
4.7 / 5

ID Coachworks Ltd where established in 2007, being one of the largest bodyshops in the north east. Our specialty is cars, commercial and HGV’s. We are credited with BS101

Premier Vehicle Care
189 Jobs Completed
Heaton
4.7 / 5

"At Premier Vehicle Care Ltd we offer you a personal service every time. Established for over 50 years, we give you the highest quality service alongside a wealth of expe

Torque Garage
261 Jobs Completed
Forest Hall
4.9 / 5

Torque Garage has been established for over 30 years with qualified staff and excellent customer satisfaction records. Friendly service, reliable repairs, servicing and a

Spanner Monkeys
90 Jobs Completed
Newcastle upon Tyne
5.0 / 5

All garage services offered. Qualified welder/fabricator on site. 4x4 and performance specialist with many years experience. Qualified electrical engineer on site. Ford B

Tripal Garage
38 Jobs Completed
Dunston, Gateshead
4.7 / 5

"At Tripal Garage we have 27 years of combined experience in diagnosing, repairing and maintaining cars and light commercial vehicles.With us you can be sure your vehicle

Gator Garage Services
198 Jobs Completed
Gateshead
4.7 / 5

We are a new local garage in the Bensham / Team Valley Area, we service and repair all makes and models of car and van, when do any job you need no matter how large or sm

Just Auto Services
14 Jobs Completed
Swawell Bank
5.0 / 5

We are a family run business specialising in all aspects of vehicle servicing and repairs for both cars and light commercial vehicles. With over 32 years’ experience in m

Hunters Auto Services Ltd.
4 Job Completed
Whitley road
5.0 / 5

Here at Hunters Auto Services, we are dedicated to delivering outstanding quality repairs and fantastic customer service. Our friendly team has a wealth of experience in

L I Am Engine Heroes
23 Jobs Completed
Gateshead
5.0 / 5

I am 100% mobile based with option of using a ramp for the larger jobs. All aspects of vehicle repairs,servicing and breakdowns undertaken. I will come to you in whatever

Show More Garages
Brake Repairs in Gateshead
Frequently asked questions
+

How much do Brake Repairs in Gateshead cost?

Brake Repair prices will vary depending on whether you need brake pads, brake discs, ABS Sensors or something more involved. The average price in Gateshead is around £130.
+

What are the most common Gateshead Brake Repairs?

The most common Gateshead Brake Repairs are Replacement Brake Pads and Replacement Brake Discs. If your ABS Light is on then you may need an ABS Sensor correction as well. Finally issues with your Brake Servo or Brake Master Cylinder are rare, but not unheard of.
+

How long do Gateshead Brake Repairs take?

A set of Brake Pads can be fitted in under one hour, and the same is true of brake discs. However we advise not to rush these things as brakes are an essential safety item on your car.
+

How can I prolong the life of my brakes?

Prolonging brakes is all about your driving style. Under braking, your brake pads and brake disc (or brake drum on some cars) rub together, creating friction and slowing the car. The less braking in your driving, the slower your brakes will wear. You should 'coast' or use engine braking where you can, and avoid sudden braking. Finally if your brake pads are worn, they will wear your brake discs faster, and vice versa, so don't leave them to wear prematurely.

Average rating for  Brake Repairs in Gateshead bookings

5.00

18 reviews

How do car brakes work?

The braking system in a car is responsible for bringing your vehicle to a stop while you’re driving.

Modern cars have brakes on all four wheels which are operated by a hydraulic system and are made up of several components all of which are subject to stress which could result in breakage.

The front brakes in a car are typically the ones which play the greater part in bringing a car to stop as the weight of the car is thrown forward every time the vehicle comes to a stop.

There are different systems used for braking from one car to the next which suits the needs of the vehicle size and function.

The common hydraulic system uses fluid to apply pressure to pistons in the car close to its wheels to bring the car to a halt.

Some cars also have power brake assistance which helps to reduce the amount of effort required to apply stopping power.

Brake Fault Symptoms

If you need to have your brakes repaired there are several issues that could have caused the problem and several things that could be affected.

If you suspect you need your brakes repaired but your car is still drivable, there are some symptoms which could give you clues as to what the problem is.

The brakes are often the noisiest part of a car if there is an issue which means you should be able to hear a problem which cannot be said of many other broken car parts.

Here are the tell-tale sounds and signs to look out for if your cars brakes have an issue.

Metallic grinding noise

This may be caused by worn out brake pads. If they are so worn down, metal will be clutching metal to stop, so the noise will not be pleasant!

Squeaking brakes

This is caused if there is friction being created from the linings of the brakes which will lead to further damage being caused to the brake pads, brake linings, brake drums and rotors.

If you have squeaking brakes you could even have a stone or debris stuck in between the brake caliper and the brake pad, though this is rare.

If you would like to know more about why my brakes are squeaking, we have written a full guide for you to understand what do do and how much the repair would be to fix squeaking brakes.

All you have to do to find out why your brakes are squeaking is clicking here

Fading of low brake pedal

This can be caused by three issues, leakage in the system, air getting into the brake linings or there is a need to adjust the brake.

You will know if there is a problem if you need to pump the brakes to just stop the car, alternatively if the pedal sinks all the way to the floor when the car is stopped the problems listed above are the most likely to be causing issue.

Pulling to one side

This happens when you have a damaged brake line, have worn the brake linings down or have uneven linings.

If you can feel brakes dragging, this is likely to be caused by contaminated fluid being in the system or the brakes not being adjusted properly.

Abnormal brake behaviour

If the brake pedal feels mushy, spongy or is slow to sink to the floor, there is a good chance that the master cylinder is to blame. The cylinder is the part responsible for applying pressure to the brakes so when that pressure is not there, there is a high chance that the master cylinder is the problem.

Contaminated brake fluid

If the rubber seals on a master cylinder break down over time, the debris and lack of effectiveness of the part will result in the contamination of brake fluid, which turns dark brown or black in the eventuality of seal degradation.

Check engine light switched on

If the engine warning light switches on, there are a huge variety of problems which could be the cause including the master cylinder. Modern cars carry a huge number of pressure sensors to detect issues within the engine. If there is a pressure change, it could be the result of the master cylinder breaking.

As soon as you notice any of these problems, it is vital that you address the issue.

A mechanic is best qualified to carry out checks due to the variety of components, fluids and materials used to make up a braking system.

If you choose to ignore a drop in performance, you are putting your vehicle and everybody inside at risk.

Top Tips for Brake Repair

When you have your brakes repaired, it is also important to ensure that you and your mechanic keep the following points in mind.

When you are having your brake pads replaced, you should also have your discs replaced and ensure each axle has its own new set.

During the first 200km the performance of your new brakes may not be tip top as they need to ‘bed in’ you should therefore avoid heavy braking if it can be helped during this time.

After the installation you should also pump the brake pedal until it becomes stiff to break the new equipment in however you should also ensure the wheels freely rotate when the pedal is not pushed down.

By following this advice you will ensure your brakes serve your vehicle in the best possible way.

Brake Pads and Discs

Brake pads and discs are the most common form of brake repair. The brake discs spin with your car's wheels and the brake pads are pushed against the discs when you apply the brake pedal in order to bring your car to a halt.

For more information visit our brake pads and discs page.

Brake Caliper

Brake calipers hold the brake pads against the discs when the brakes are applied so a car cannot come to a stop without them being fully operational.

The brake caliper acts like a clamp when bringing the car to a stop and it needs to be able to grip the disc properly and apply enough pressure to work properly.

Brake caliper repair can consist of fixing the existing part, however, there is a high chance that the brake caliper will be replaced if there is a major problem as refurbishing a brake caliper or attempting to apply a fix may not completely repair the part.

Brake Fluid

Brake fluid is critical for the brake system and brake fluid problems are common when it comes to brake repairs. If the brake fluid drops below a certain level, a drivers ability to bring a car to a halt will drop rapidly. This often happens due to a leak as a result of rust.

Brake fluid will always be checked during a full service or an MOT and if the level is too low, a mechanic will check for a leak as this is the most common cause of low brake fluid.

If you have not had a full service and you are not due an MOT for a good while, it is always good practice to check your own car fluid levels, including brake fluid levels. The brake fluid container is located beneath the hood of the car and close to the bottom of the windshield. Check the brake fluid level by unscrewing the lid and peering into the container. Our fluid levels guide gives more information on checking your brake fluid.

ABS Brakes

An anti-lock braking system is used by many modern cars. This method of braking has been implemented as a safety measure as it allows a car to maintain tractive contact with the road as the brakes are applied and a car comes to a stop.

If you are wandering how do you use ABS brakes, then don’t worry, the ABS braking system is automatically applied to a car when the brakes are pressed, you don’t need to do anything different.

Cars with an ABS system will also be subject to the ABS light coming on at one time or another and if this happens, you need to take the car to a garage to have the issue looked at as the system may no longer be fully operational. If the ABS light AND brake light switch are on at the same time, it is critically important that you get to a local garage as soon as possible.

Brake Rotors

Brake rotors is another name for brake discs and if you would like more information on this subject, we have an entire page dedicated to brake pads and discs.

Master Cylinder

The master cylinder is a vital part of the braking system as it serves as the main valve through which brake fluid is channelled to the brake lines and onto the brake calipers which in turn, grip the brake pads which clamp onto the brake disc to bring a car to a halt.

A master cylinder controls the flow of brake fluid and so if there is a fault, the car will not be able to stop properly.

Brake Lines

Brake lines carry brake fluid from the master cylinder to the brake calipers. Brake lines are subject to deterioration from the result of rust damage and brake fluid leakage. If the brake lines break, then fluid cannot be carried to the brake calipers and you will not be able to stop your car. That is why it is so important to keep an eye on a drop in performance of your braking power as a reduction may highlight a problem with the brake lines.

Backing Plates

Backing plates hold brake discs in place and are what they are mounted upon. There is not a huge amount of problems when it comes to backing plates as the part is simply there to hold another part in place. The biggest issue could be that the part becomes dislodged from the result of an impact.

Handbrake repairs

The most common form of handbrake problems is when the handbrake cable snaps and a new one needs to be fitted. A new handbrake cable is not expensive and fitting the part is not a complex job so you should not have to pay a lot in labour.

If you think your handbrake is close to snapping, it is critical that you take your car to a garages as soon as possible. If you leave your car parked on an incline and the handbrake cable snaps while you are away from the vehicle, it could suddenly start rolling down a hill and pose a serious risk to pedestrians and other drivers.

The handbrake cable is made of metal and so, being exposed to the elements, will deteriorate over time. Rust may be a cause of the handbrake cable to weaken and snap.

One of the most obvious signs that your handbrake cable is close to snapping, is that the handbrake itself will pull up higher than usual.

Brake Specialists Near You

To find the best brake repair or replacement service in your region;

  1. Enter your car registration number
  2. Give us a few details about your car and your requirements
  3. We’ll send you a great selection of quotes from mechanics and garages in your area

You can then compare the quotes and read reviews from previous customers to find the best deal in your area, before booking the local brake repair online.

Gary from Complete Mechanics talks through the process of changing brake pads and discs